copie din Help:

Highpass: This fader determines the cut-off frequency for a steeply sloped highpass filter (24dB/Octaves) to remove part with low frequencies, such as rumbling or noises created when touching the microphone.

Gate: With gate you can attenuate the signals that fall below the threshold. Here, a smooth curve and a maximum 'softening' of up to 24dB is used to avoid hard transitions.

DeEsser: The effect is very similar to that of the eFX_DeEsser. Here, however, the application frequency is set. The filter used in eFX_VocalStrip works in another range. The fader determines the degree of reduction.

Compression: For the most part, an eFX_Compressor component contributes to working parameters for optimizing voice recordings. The further the fader is turned the lower the threshold and higher the compression ratio. The Attack and Release times are selected according to the program.

Tone: This EQ corresponds principally to the filter network, which is also used in the eFX_TubeStage plug-in. With this you can simply and effectively calibrate the sonic balance of the voice signal, e. g. for better integration into the mix.